McLelland AVD-800P Guia de preparacion descargar pdf (Pagina 5)

8 ZONES AUDIO/ VIDEO MULTI-ROOM/

SOURCES DISTRIBUTION AMPLIFIER

AVD-800P

Figure 1: Preamp Line Out

Each Zone has a Preamp Out to send “Zone Selected” by L+R stereo RCA Jacks for use with applica-

tions where either more power is required for Zone or passing to other separate higher power amplier,

such as the McLelland PD-100/200/500 or PD-300/600SB.

Figure 2: Speaker Connections

Each conductor is screwed down to connector block and plugged into the speaker output on the back of

the amplier. The AVD-800P speaker terminals (amplier output) are 8 ohms safe, please be sure to cor-

rect polarity by connecting the “+” and “-“ terminal from each channel on the AVD-800P to the correspon-

ding “+” and “-“ terminal on each speaker. Also need to check the combined impedance presented to the

speaker terminals by the speaker is 8 ohms minimum.

Figure 3: Zone Expansion (Connecting Two AVD-800P Controller)

When linking two units together, designate one unit as the Primary Unit (Zone 1~8) and the other unit as

the Secondary Unit (Zone 9~16). All source components should be connected directly to the Primary Unit

Source A/V Input. Us the Primary Units Audio and Video Loop to feed the source component inputs of

the Secondary Unit.

* All of the source components emitters should be connected directly to the Primary Unit IR Emitter Out-

put Ports.

1 2 3 4 5 6 7 8 9

Sin comentarios

McLelland AVD-800P Guia de preparacion Pagina 5